Orari di apertura 
Lun-Ven 9-13 14-18
Sabato  9-13  14-16

Domenica Chiuso


Seleziona il tipo di ricerca:


ATTENZIONE: Alcune informazioni relative al prodotto sono visibili soltanto agli utenti registrati!

Torna alla pagina precedente TORNA CATALOGO / MODELLI DINAMICI / AEREI A SCOPPIO / .2 PER MOTORI DA 10 A 25CC / SCO-HAN4550

Articolo : SCO-HAN4550 Disponibilità :  Scarsa  Scarsa


    PIPER J3 CUB            2690mm

    PIPER J3 CUB            2690mm   PIPER J3 CUB            2690mm   PIPER J3 CUB            2690mm
    PIPER J3 CUB 2690mm

    PER SCOPPIO O ELETTRICO

    Fornitore

    Key Features

    Full-bodied, posable pilot figure
    Scale dash including Cub in tachometer
    Scale Cub wheels and functioning landing gear
    Operating door panels and removable interior seating for easy access to the plane's interior
    Collapsible wing struts connected to wing and fuselage with an intelligent pin and cotter key system
    Tubular construction for top outline more true-to-Cub scale lines
    Scale fin to fuselage fillet
    Covered in genuine Hangar 9® UltraCote®

    Overview

    Large scale air enthusiast will marvel at the Hangar 9 giant-scale, super detailed J-3 Cub. The Cub is perfect for a first-time large scale flight experience because of its smooth flight characteristics.

    Hangar 9 has thought of just about everything to make this 1/4-scale Cub an incredibly accurate replica of the ever-popular Piper J-3 Cub. Right down to the scale dash with Piper Cub emblem in the tachometer, this is the large scale beauty designed with the scale admirer in mind. Scale enthusiasts will appreciate the more realistic Cub outline facilitated by simulated scale tubular construction of the top fuselage contour. Likewise, the scale fin-to-fuselage fillet molding echoes its full-scale counterpart. The scale Cub wheels and working landing gear facilitate easier landings, touch-and-go excitement and one-wheel arrivals.

    Scale fanatics will be astonished by the full-bodied pilot figure that is not only of accurate scale but is also posable. The operating door panels offer easy access to the interior of the plane and interior seating locks to the cockpit floor yet is also removable both also contribute to the scale realism of the full-size Cub.

    Besides the unparalleled scale detail, you also get smart design features like collapsible wing struts that are connected to the wing with a pivoting pin and keeper, while a pin and cotter key system allows the struts to be removed from the fuselage without hassle. The 2-piece stab can also be removed if necessary.

    The J-3 Cub can also be transformed by luxury of gas-and-go by adding a Zenoah G20ei engine (ZENE20EI).

    Barcode 0605482589984


    Aggiungi l'articolo alla lista dei desideri!
     Articolo aggiunto alla tua lista dei desideri! 
    PIPER J3 CUB            2690mm
    Product Specifications

    Wingspan: 106 in (269 cm)
    Overall Length: 68 in (172.7 cm)
    Wing Area: 1630 sq in (150.2 sq dm)
    Flying Weight: 14.5–16.5 lb (6.6–7.5 kg)
    Engine Size: 1.00–1.60 2-stroke 1.20–1.80 4-stroke 20–26cc gas
    Motor Size: E-flite Power 110 Brushless Outrunner
    Radio: 4 to 6 channels
    Servos: 6 JR Hi-Torque (JRPS821) digital servos
    Trim Scheme Colors: Cub Yellow (HANU884) & Black (HANU874)
    CG (center of gravity): 4 ¾ to 5 inches from the leading edge of the wing at fuselage
    Wing Loading: 21.73 oz/sq ft
    Prop Size: 15x8–16x6 for gas 14x6–16x4 for 2-stroke 16x6–18x6 for 4-stroke 19x8E for electric
    Spinner Size: 8mm x 1.25
    Recommended Battery: 4S 4000 - 5000mAh Li-Po, 2 required for electric conversion
    Aileron: 5/8 in—up 1/2 in—down
    Elevator: 7/8 in—up/down
    Rudder: 1 ½ in—left/right
    Scale: 25%

    Needed to Complete

    Advanced
    Electric Conversion Setup
    Recommended Setup - Gas
    Recommended - 4-Stroke Glow
    Recommended- 2-Stroke Glow


    Aggiungi l'articolo alla lista dei desideri!
     Articolo aggiunto alla tua lista dei desideri! 
    PIPER J3 CUB 2690mm

    PER SCOPPIO O ELETTRICO

    Fornitore

    Key Features

    Full-bodied, posable pilot figure
    Scale dash including Cub in tachometer
    Scale Cub wheels and functioning landing gear
    Operating door panels and removable interior seating for easy access to the plane's interior
    Collapsible wing struts connected to wing and fuselage with an intelligent pin and cotter key system
    Tubular construction for top outline more true-to-Cub scale lines
    Scale fin to fuselage fillet
    Covered in genuine Hangar 9® UltraCote®

    Overview

    Large scale air enthusiast will marvel at the Hangar 9 giant-scale, super detailed J-3 Cub. The Cub is perfect for a first-time large scale flight experience because of its smooth flight characteristics.

    Hangar 9 has thought of just about everything to make this 1/4-scale Cub an incredibly accurate replica of the ever-popular Piper J-3 Cub. Right down to the scale dash with Piper Cub emblem in the tachometer, this is the large scale beauty designed with the scale admirer in mind. Scale enthusiasts will appreciate the more realistic Cub outline facilitated by simulated scale tubular construction of the top fuselage contour. Likewise, the scale fin-to-fuselage fillet molding echoes its full-scale counterpart. The scale Cub wheels and working landing gear facilitate easier landings, touch-and-go excitement and one-wheel arrivals.

    Scale fanatics will be astonished by the full-bodied pilot figure that is not only of accurate scale but is also posable. The operating door panels offer easy access to the interior of the plane and interior seating locks to the cockpit floor yet is also removable both also contribute to the scale realism of the full-size Cub.

    Besides the unparalleled scale detail, you also get smart design features like collapsible wing struts that are connected to the wing with a pivoting pin and keeper, while a pin and cotter key system allows the struts to be removed from the fuselage without hassle. The 2-piece stab can also be removed if necessary.

    The J-3 Cub can also be transformed by luxury of gas-and-go by adding a Zenoah G20ei engine (ZENE20EI).

    Barcode 0605482589984


    Aggiungi l'articolo alla lista dei desideri!
     Articolo aggiunto alla tua lista dei desideri! 
Note tecniche e descrizioni dei vari articoli sono pubblicati così come vengono forniti dal costruttore e/o distributore, immagini allegate comprese, e potrebbero contenere delle inesattezze o delle omissioni. Non ci assumiamo quindi alcuna responsabilità a riguardo.

Big Models S.r.l. - via Pier Vittorio Aldini,41 - Roma
Tel. 06 79320402 • Fax. 06 79320402 • P. IVA 04563861006 • Iscr. AEE n° IT09060000006100
La vendita è riservata ai soli commercianti del settore
Mail: info@ingrossomodellismo.it   © Big Models s.r.l. 2005
NOTA: tutti i prodotti da Noi distribuiti recepiscono la DIRETTIVA R.&.T.T.E. 1999/5/CE DECRETO LEGISLATIVO 269/01

  webmaster : Massimo Marra