Orari di apertura 
Lun-Ven 9-13 14-18
Sabato  9-13  14-16

Domenica Chiuso


Seleziona il tipo di ricerca:


ATTENZIONE: Alcune informazioni relative al prodotto sono visibili soltanto agli utenti registrati!

Torna alla pagina precedente TORNA CATALOGO / MODELLI DINAMICI / ELICOTTERI / .4 ELICOTTERI ELETTR. IN KIT PROFI / ROBRH55E09X-M

Articolo : ROBRH55E09X-M Disponibilitΰ :  Non Disponibile  NonDisponibile


    TREX 550L DOMINATOR BeastX HD

    TREX 550L DOMINATOR BeastX HD   TREX 550L DOMINATOR BeastX HD   TREX 550L DOMINATOR BeastX HD
    TREX 550L DOMINATOR BeastX HD

    SUPER COMBO

    Fornitore

    With a size that fall in-between large and small models, T-REX 550 features stability and agility which is the most popular model for pilots in all classes to practice.
    Now T-REX 550L Dominator inherit with all outstanding design concepts and much superior power supply that will guaranteed jaw dropping performance.

    T-REX 550L firstly utilizes composite material integration technology on carbon side frame plates, also adding battery mounting rails and top mounted motor base design make assembly easy and protectable.
    Designed with direct servo CCPM control, and a single piece main bearing block with integrated servo mounts plus equipped with the low CG DFC rotor head, exhibits exhilarating 3D performance and unimaginable flight speed. High quality new tail gearbox design, combined with new dual point mounted tail pitch control assembly to minimize slops and increase rudder control precision.

    T-REX 550L Dominator equipped with 730MX 850KV motor with unique DOMINATOR painting scheme and extremely efficient and powerful output brand new high voltage brushless BL815H/BL855H servos features with high torque and super efficiency reaction and higher precision also keep extremely low temperature after flight not only can extend the service life but also be the favorite ones for all our factory pilots.


    Features (T-REX 550L)
    • Equipped with the low CG DFC rotor head, exhibits exhilarating 3D performance and unimaginable flight speed.
    • Designed with direct servo CCPM control, and a single piece main bearing block with integrated servo mounts similar to that of T-Rex 700E DFC, for simplified servo installation and clean aesthetic.
    • New style swash anti-rotation guide with embedded anti-wear material, effectively minimize the wear between swashplate long ball and guide. text by fw
    • Innovative sliding battery tray rails imbedded into the 3K side frames, with patented spring loaded latching mechanism, allowing for quick battery access as well as battery protection.
    • Carbon side frame plates utilized composite material integration technology, adding battery mounting rails.The clever use of open spaces within the frame resulting in a structure that is both rigid and aesthetically pleasing.
    • High quality new tail gearbox design, combined with new dual point mounted tail pitch control assembly to minimize slops and increase rudder control precision.
    • Utilizes newly designed vertical tail fin, creating a brand new look for T-Rex 550L.

    MICROBEAST PLUS is a 3-axis control system for flybarless RC model helicopters. MEMS sensors of the latest generation measure the aircraft's rotational movement with unprecedented precision and transmit the data digitally and in real time to the system.
    MICROBEAST PLUS HD has a housing in aluminum composite construction and a switchable high power input to meet the requirements of large RC helicopters (550 size and bigger helicopters that use standard size servos) in terms of providing a stable power supply.

    The sophisticated setup can quickly be done everywhere and no expensive programming box or computer is needed. So many settings can also be changed simply and easily at the flying field.
    Further options are available with the optional USB2SYS interface and the StudioX software package. MICROBEAST PLUS can be kept up to date by using the update functionality and advanced pilot can thus customize the unit specifically to their needs.

    Current Firmware 4.1.5: Additional to the basic functionality as flybarless system and tail gyro an internal RPM Governor function for helicopters with electric or combustion drive is included.

    The device can be upgraded to ProEdition firmware with AttitudeControl (Bail out rescue function) at any time (subject to a charge).

    Technical data:
    Input voltage: 3,5 V - 8,5 V DC (Operation with 2 cell LiPo possible)
    Processor: 32 Bit ARM
    Sensor: 6-Axis MEMS (Gyro + Accelerometer)
    Dimensions: 36 x 25 x 14 mm
    Weight (w/o wiring): ca. 11g

    Features:

    Requires a radio system with at least 6 output channels (5 control functions + throttle).

    Servo outputs:
    • 3 swash plate servos
    Maximum adjustable servo update rate: 200Hz
    Swash plate mixing types: mCCPM, 90°, 120°, 135°, 140° as well es freely configurable mixer with StudioX, i.e. for swash phasing
    • 1 rudder servo
    Supports mostly all types of servos with 1520΅s, 960΅s or 760΅s
    Maximum adjustable servo update rate: 560Hz
    • When using a SingleLine receiver additionally:
    throttle output, auxiliary output for landing gear, position lights or else

    Signal inputs:
    • Standard receiver with single servo output channels
    • SingleLine receivers: Spektrum DSM2/DSMX remote satellite*, JR RJ01 DMSS remote satellite*, Futaba S.Bus, SRXL (JR XBUS, Spektrum SRXL, SUMD, M-Link, BEASTX SRXL, JETI UDI), SPPM
    • Sensor board (i. e. for connecting a rpm sensor for internal electric or nitro RPM governor function).

    * only with Spektrum remote satellite adapter

    High power input:
    • well proven electronic switch system
    • allows to connect power wires with large diameter between receiver battery/BEC and flybarless system

    Box contents:
    • MICROBEAST PLUS HD
    • Switch harness
    • Power cable
    • Receiver connection cables
    • 3M adhesive pads
    • Adjustment tool
    • Quick start manual poster
    • Plastic quick reference card
    • Sticker set

    Optional accessories:
    • USB2SYS Interface for communication with StudioX PC Software
    • Spektrum remote satellite adapter


    Codice : RH55E09X-MBPHD

    Barcode 2010229550093


    Aggiungi l'articolo alla lista dei desideri!
     Articolo aggiunto alla tua lista dei desideri! 
    TREX 550L DOMINATOR BeastX HD
    Specifications
    Length: 1070mm
    Height: 337mm
    Width: 210mm text by fw
    Main Blade Lenght: 550mm
    Main Rotor Diameter: 1248mm
    Tail Rotor Diameter: 254mm
    Motor Drive Gear: 16T
    Main Drive Gear: 112T
    Autorotation Tail Drive Gear: 131T
    Tail Drive Gear: 34T
    Drive Gear Ratio: 1:7:3.85
    Weight (w/o power system): 2790g


    Content
    • 1x T-REX 550L DOMINATOR Kit
    • 2x 550 Carbon Fiber Blade text by fw
    • 2x 90mm Carbon Fiber Tail Blade
    • 1x 730MX Brushless Motor (850KV)
    • 3x BL815H High Voltage Brushless servo
    • 1x BL855H High Voltage Brushless servo
    • 1x Castle Talon 90 Brushless ESC
    • 1x BEASTX MICROBEAST Plus HD Flybarless System


    Radio transmitter and electronic equipment required for assembly
    • 1x Transmitter (6-channel or more, helicopter system)
    • 1x Receiver (6-channel or more, suitable to Transmitter)
    • 1x Pitch gauge or Digital Pitch Gauge text by fw
    • 1x 6S Li-Po 2600~5200mAh battery
    • 1x LiPo Battery Charger


    Aggiungi l'articolo alla lista dei desideri!
     Articolo aggiunto alla tua lista dei desideri! 
    TREX 550L DOMINATOR BeastX HD

    SUPER COMBO

    Fornitore

    With a size that fall in-between large and small models, T-REX 550 features stability and agility which is the most popular model for pilots in all classes to practice.
    Now T-REX 550L Dominator inherit with all outstanding design concepts and much superior power supply that will guaranteed jaw dropping performance.

    T-REX 550L firstly utilizes composite material integration technology on carbon side frame plates, also adding battery mounting rails and top mounted motor base design make assembly easy and protectable.
    Designed with direct servo CCPM control, and a single piece main bearing block with integrated servo mounts plus equipped with the low CG DFC rotor head, exhibits exhilarating 3D performance and unimaginable flight speed. High quality new tail gearbox design, combined with new dual point mounted tail pitch control assembly to minimize slops and increase rudder control precision.

    T-REX 550L Dominator equipped with 730MX 850KV motor with unique DOMINATOR painting scheme and extremely efficient and powerful output brand new high voltage brushless BL815H/BL855H servos features with high torque and super efficiency reaction and higher precision also keep extremely low temperature after flight not only can extend the service life but also be the favorite ones for all our factory pilots.


    Features (T-REX 550L)
    • Equipped with the low CG DFC rotor head, exhibits exhilarating 3D performance and unimaginable flight speed.
    • Designed with direct servo CCPM control, and a single piece main bearing block with integrated servo mounts similar to that of T-Rex 700E DFC, for simplified servo installation and clean aesthetic.
    • New style swash anti-rotation guide with embedded anti-wear material, effectively minimize the wear between swashplate long ball and guide. text by fw
    • Innovative sliding battery tray rails imbedded into the 3K side frames, with patented spring loaded latching mechanism, allowing for quick battery access as well as battery protection.
    • Carbon side frame plates utilized composite material integration technology, adding battery mounting rails.The clever use of open spaces within the frame resulting in a structure that is both rigid and aesthetically pleasing.
    • High quality new tail gearbox design, combined with new dual point mounted tail pitch control assembly to minimize slops and increase rudder control precision.
    • Utilizes newly designed vertical tail fin, creating a brand new look for T-Rex 550L.

    MICROBEAST PLUS is a 3-axis control system for flybarless RC model helicopters. MEMS sensors of the latest generation measure the aircraft's rotational movement with unprecedented precision and transmit the data digitally and in real time to the system.
    MICROBEAST PLUS HD has a housing in aluminum composite construction and a switchable high power input to meet the requirements of large RC helicopters (550 size and bigger helicopters that use standard size servos) in terms of providing a stable power supply.

    The sophisticated setup can quickly be done everywhere and no expensive programming box or computer is needed. So many settings can also be changed simply and easily at the flying field.
    Further options are available with the optional USB2SYS interface and the StudioX software package. MICROBEAST PLUS can be kept up to date by using the update functionality and advanced pilot can thus customize the unit specifically to their needs.

    Current Firmware 4.1.5: Additional to the basic functionality as flybarless system and tail gyro an internal RPM Governor function for helicopters with electric or combustion drive is included.

    The device can be upgraded to ProEdition firmware with AttitudeControl (Bail out rescue function) at any time (subject to a charge).

    Technical data:
    Input voltage: 3,5 V - 8,5 V DC (Operation with 2 cell LiPo possible)
    Processor: 32 Bit ARM
    Sensor: 6-Axis MEMS (Gyro + Accelerometer)
    Dimensions: 36 x 25 x 14 mm
    Weight (w/o wiring): ca. 11g

    Features:

    Requires a radio system with at least 6 output channels (5 control functions + throttle).

    Servo outputs:
    • 3 swash plate servos
    Maximum adjustable servo update rate: 200Hz
    Swash plate mixing types: mCCPM, 90°, 120°, 135°, 140° as well es freely configurable mixer with StudioX, i.e. for swash phasing
    • 1 rudder servo
    Supports mostly all types of servos with 1520΅s, 960΅s or 760΅s
    Maximum adjustable servo update rate: 560Hz
    • When using a SingleLine receiver additionally:
    throttle output, auxiliary output for landing gear, position lights or else

    Signal inputs:
    • Standard receiver with single servo output channels
    • SingleLine receivers: Spektrum DSM2/DSMX remote satellite*, JR RJ01 DMSS remote satellite*, Futaba S.Bus, SRXL (JR XBUS, Spektrum SRXL, SUMD, M-Link, BEASTX SRXL, JETI UDI), SPPM
    • Sensor board (i. e. for connecting a rpm sensor for internal electric or nitro RPM governor function).

    * only with Spektrum remote satellite adapter

    High power input:
    • well proven electronic switch system
    • allows to connect power wires with large diameter between receiver battery/BEC and flybarless system

    Box contents:
    • MICROBEAST PLUS HD
    • Switch harness
    • Power cable
    • Receiver connection cables
    • 3M adhesive pads
    • Adjustment tool
    • Quick start manual poster
    • Plastic quick reference card
    • Sticker set

    Optional accessories:
    • USB2SYS Interface for communication with StudioX PC Software
    • Spektrum remote satellite adapter


    Codice : RH55E09X-MBPHD

    Barcode 2010229550093


    Aggiungi l'articolo alla lista dei desideri!
     Articolo aggiunto alla tua lista dei desideri! 
Note tecniche e descrizioni dei vari articoli sono pubblicati cosμ come vengono forniti dal costruttore e/o distributore, immagini allegate comprese, e potrebbero contenere delle inesattezze o delle omissioni. Non ci assumiamo quindi alcuna responsabilitΰ a riguardo.

Big Models S.r.l. - via Pier Vittorio Aldini,41 - Roma
Tel. 06 79320402 • Fax. 06 79320402 • P. IVA 04563861006 • Iscr. AEE n° IT09060000006100
La vendita θ riservata ai soli commercianti del settore
Mail: info@ingrossomodellismo.it   © Big Models s.r.l. 2005
NOTA: tutti i prodotti da Noi distribuiti recepiscono la DIRETTIVA R.&.T.T.E. 1999/5/CE DECRETO LEGISLATIVO 269/01

  webmaster : Massimo Marra