Orari di apertura 
Lun-Ven 9-13 14-18
Sabato  9-13  14-16

Domenica Chiuso


Seleziona il tipo di ricerca:


ATTENZIONE: Alcune informazioni relative al prodotto sono visibili soltanto agli utenti registrati!

Torna alla pagina precedente TORNA CATALOGO / MODELLI DINAMICI / AUTO ELETTRICHE / .1 CRAWLER SCALER / RC4ZK0001

Articolo : RC4ZK0001 Disponibilità :  Scarsa  Scarsa


    DEFENDER D90 TELAIO GELANDE II

    DEFENDER D90 TELAIO GELANDE II   DEFENDER D90 TELAIO GELANDE II   DEFENDER D90 TELAIO GELANDE II
    DEFENDER D90 TELAIO GELANDE II

    IN KIT SENZA ELETTRONICA RC4WD

    Fornitore

    GELANDE II TRUCK KIT W/DEFENDER D90 BODY SET


    Experience the versatility and advanced design of the Gelande 2 for yourself. Packed full of capability, the Gelande 2 is ready for any challenging condition. Put your off-road driving to the test and see why the G2 is unmatched in its class!
    G2 is built with quality materials and craftsmanship. It can maneuver extreme descents and climbs with ease. The new R3 single speed transmission provides power down to the transfer case and out to the all new Yota II axles.
    The core of the G2 is built for the true off-road enthusiast. From customized options to tried and true performance. From emergency and expedition vehicles, to daily drivers and down and dirty off-road rigs. It can pull off many looks and with the endless add-ons offered, you will be able to customize your G2 and have it fit any identity.
    The G2 comes with 4 link rear and 3 link front with panhard bar as standard. The servo is mounted on the chassis out of view for a more scale appearance.
    Are you ready for your off-road experience?

    Custom Designed for True to Scale Looks
    Realistic Aluminum Ladder Frame Chassis
    R3 Single Speed Transmission
    Center Mounted Realistic 4x4 Transfer Case
    Cast Metal Axles with Locked Differentials
    3 link front and 4 link rear suspension
    1.9 Stamped steel beadlocks w/lug nuts
    Super grip dirt grabber tires
    Chassis mounted steering servo
    Plastic fuel cell receiver box
    Dual spring oil filled shock absorbers

    All New Hammer Transfer Case
    Ratio - 1.47:1 Gears - Wide 32P steel gears Features - 8 bearings, cast casing, hardened gears
    All New R3 Single Speed Transmission
    Ratios: Pinion/spur 14/64 = 4.57:1 Internal 1.78:1
    Gears - Wide steel 32P, Delrin spur, slipper clutch

    All New Cast Yota II Axles
    Ratio: 15/40 = 2.67:1
    Width at hex 180.5mm

    G2 Suspension
    Double triangulated 4 Link rear suspension.
    3 Link front suspension with panhard bar
    Shock Absorbers
    Dual Spring 80mm Shocks - Can be oil filled

    Wheels
    Type: 1.9 5 lug Wagon Wheels
    Hub: Pin type Width: 25mm
    Back spacing: 11mm

    Bumpers
    Machined billet aluminum, lightweight

    Drivetrain
    The All New R3 single speed transmission comes with a tough cast metal case and new wider gears to allow for more abuse along with a Delrin spur with slipper clutch. Also features a sturdy billet aluminum motor mount for durability.

    The G2 includes the new Hammer Transfer Case. Packed with scale detail, the Hammer features a cast metal exterior and the same heavy duty 32P widened gears for durability.

    Drawing on the success of the RC4WD MOA gear sets, the G2 drivetrain has the most durable gears RC4WD has to offer so the G2 will stay on the trail, day after day.

    The most scale accurate axles on the market, the RC4WD Cast Yota2 axles feature innovative 8 degree round knuckles, unique removable diff covers, new lower mounting points and a compact offset pumpkin in the front.

    The Driveshafts for the G2 are an all new design featuring bulletproof steel universals and a new high quality plastic shaft for great driveline angles and durability on the trail.

    Suspensions

    The G2 Chassis features a molded fuel cell that doubles as an electronics storage box plus an aluminum, frame-mounted under cab electronics tray for multiple electronics mounting options. Also includes a sturdy battery tray with strap mounts.

    The G2 includes a set of new RC4WD Dual Spring Shocks. An all new design, this ultimate scale shock has realistic looks and the ultimate in performance. Machined from billet aluminum with dual springs and totally rebuildable.

    The All New G2 Chassis is a machined billet aluminum ladder frame with an all link suspension design, scale shock hoops, chassis servo mounts and hard body mounting points for the ultimate in strength.

    The G2 includes a set of RC4WD Black Stamped Steel 1.9 internal beadlock wheels. Featuring a super tough black finish, aluminum internal locking ring and popular 5 lug design with separate hub.

    Every G2 needs a tough set or rock grabbing tires and the included Dirt Grabbers in X3 Compound deliver the traction as well as perfect scale looks in just the right size.

    Details

    The G2 features the Defender Scale Body Set. The Defender body has an awesome appointment of scale details including mirrors, door handles, vents and grilles to match the 1:1 vehicle.

    The unmistakable lines of a classic. The Defender Body Set is an exact replica of the full scale vehicle, right down to the rivets! No other scale body comes this close to realism.

    The Defender Body Set comes in durable hard plastic molded in a paintable white finish, perfect for custom paint. All the trim parts are separate pieces to get a great look, with minimal fuss.

    Comprised of over 50 parts, the Defender Body Set features a full detailed interior. Folding seats, gear shifter, handbrake and detailed dash. Its all here to bring your build to next level.

    The crisp lines and subtle details are all captured. Chrome plated parts are included as well as colored lenses for all signal lights. All lamps can be illuminated with a minimum of modification.
    Gelande II Shown Painted and with Upgrades (Not Included)


    Barcode 2001484000010


    Aggiungi l'articolo alla lista dei desideri!
     Articolo aggiunto alla tua lista dei desideri! 
    DEFENDER D90 TELAIO GELANDE II
    Caratteristiche :

    G2 Truck Dimensions
    Wheels base: 275mm (10.8")
    Width: 220mm (8.7")
    Height: 254mm (10")
    Ground clearance: 55mm (2.2")
    Final Drive Ratio: 31.9:1
    Weight: 5.58Lbs / 2.533Kg

    What's Included:

    1x Gelande II Truck Kit w/Defender D90 Body Set
    This is a kit that requires building time (appro. 2-3 hours) and electronics.

    Notes:

    Spare Wheel and Tire not included
    Fits RC4WD Spare Tire Case For Defender Body (Z-X0012)
    RC4WD Spare Tires Case for Defender Body (Stamped w/RC4WD) (Z-X0010)
    Fits ARB Land Rover Defender 90 Winch Bar Front Bumper for Gelande 2 (Z-S0853) and RC4WD 1/10 Warn 9.5cti Winch (Z-S1079), but should work with RC4WD 1/10 Warn 9.5cti Winch CNC Mounting Plates (Z-S1168)
    Required to Complete:

    Truck Kit
    Hex Drivers (1.5mm, 2mm, 2.5mm)
    Long Nose Pliers
    Associated Thread Locking Adhesive
    Cross Wrench or Nut Driver (4mm, 5.5mm, 7mm)


    Body Kit

    Modeling / Craft Knife
    Side Cutters
    Instant glue / Plastic Cement (prefer non whitening)
    Hex Drivers (1.5mm, 2mm)
    Cross Phillips Screwdrivers (small)
    Electronics

    Motor (35t, 45t, or 55t)
    Electronic Speed Controller ESC" (Z-E0007)
    Radio and Receiver (2 channel or more) (3 Channel Z-R0009, or 4 Channel Z-R0006)
    1x Standard Size Servo (Z-E0035)
    Battery (Consult your ESC" manual) 6 cell NIMH, or 2 cell Lipo battery
    Charger (Consult your battery guide) Chargers


    Aggiungi l'articolo alla lista dei desideri!
     Articolo aggiunto alla tua lista dei desideri! 
    DEFENDER D90 TELAIO GELANDE II

    IN KIT SENZA ELETTRONICA RC4WD

    Fornitore

    GELANDE II TRUCK KIT W/DEFENDER D90 BODY SET


    Experience the versatility and advanced design of the Gelande 2 for yourself. Packed full of capability, the Gelande 2 is ready for any challenging condition. Put your off-road driving to the test and see why the G2 is unmatched in its class!
    G2 is built with quality materials and craftsmanship. It can maneuver extreme descents and climbs with ease. The new R3 single speed transmission provides power down to the transfer case and out to the all new Yota II axles.
    The core of the G2 is built for the true off-road enthusiast. From customized options to tried and true performance. From emergency and expedition vehicles, to daily drivers and down and dirty off-road rigs. It can pull off many looks and with the endless add-ons offered, you will be able to customize your G2 and have it fit any identity.
    The G2 comes with 4 link rear and 3 link front with panhard bar as standard. The servo is mounted on the chassis out of view for a more scale appearance.
    Are you ready for your off-road experience?

    Custom Designed for True to Scale Looks
    Realistic Aluminum Ladder Frame Chassis
    R3 Single Speed Transmission
    Center Mounted Realistic 4x4 Transfer Case
    Cast Metal Axles with Locked Differentials
    3 link front and 4 link rear suspension
    1.9 Stamped steel beadlocks w/lug nuts
    Super grip dirt grabber tires
    Chassis mounted steering servo
    Plastic fuel cell receiver box
    Dual spring oil filled shock absorbers

    All New Hammer Transfer Case
    Ratio - 1.47:1 Gears - Wide 32P steel gears Features - 8 bearings, cast casing, hardened gears
    All New R3 Single Speed Transmission
    Ratios: Pinion/spur 14/64 = 4.57:1 Internal 1.78:1
    Gears - Wide steel 32P, Delrin spur, slipper clutch

    All New Cast Yota II Axles
    Ratio: 15/40 = 2.67:1
    Width at hex 180.5mm

    G2 Suspension
    Double triangulated 4 Link rear suspension.
    3 Link front suspension with panhard bar
    Shock Absorbers
    Dual Spring 80mm Shocks - Can be oil filled

    Wheels
    Type: 1.9 5 lug Wagon Wheels
    Hub: Pin type Width: 25mm
    Back spacing: 11mm

    Bumpers
    Machined billet aluminum, lightweight

    Drivetrain
    The All New R3 single speed transmission comes with a tough cast metal case and new wider gears to allow for more abuse along with a Delrin spur with slipper clutch. Also features a sturdy billet aluminum motor mount for durability.

    The G2 includes the new Hammer Transfer Case. Packed with scale detail, the Hammer features a cast metal exterior and the same heavy duty 32P widened gears for durability.

    Drawing on the success of the RC4WD MOA gear sets, the G2 drivetrain has the most durable gears RC4WD has to offer so the G2 will stay on the trail, day after day.

    The most scale accurate axles on the market, the RC4WD Cast Yota2 axles feature innovative 8 degree round knuckles, unique removable diff covers, new lower mounting points and a compact offset pumpkin in the front.

    The Driveshafts for the G2 are an all new design featuring bulletproof steel universals and a new high quality plastic shaft for great driveline angles and durability on the trail.

    Suspensions

    The G2 Chassis features a molded fuel cell that doubles as an electronics storage box plus an aluminum, frame-mounted under cab electronics tray for multiple electronics mounting options. Also includes a sturdy battery tray with strap mounts.

    The G2 includes a set of new RC4WD Dual Spring Shocks. An all new design, this ultimate scale shock has realistic looks and the ultimate in performance. Machined from billet aluminum with dual springs and totally rebuildable.

    The All New G2 Chassis is a machined billet aluminum ladder frame with an all link suspension design, scale shock hoops, chassis servo mounts and hard body mounting points for the ultimate in strength.

    The G2 includes a set of RC4WD Black Stamped Steel 1.9 internal beadlock wheels. Featuring a super tough black finish, aluminum internal locking ring and popular 5 lug design with separate hub.

    Every G2 needs a tough set or rock grabbing tires and the included Dirt Grabbers in X3 Compound deliver the traction as well as perfect scale looks in just the right size.

    Details

    The G2 features the Defender Scale Body Set. The Defender body has an awesome appointment of scale details including mirrors, door handles, vents and grilles to match the 1:1 vehicle.

    The unmistakable lines of a classic. The Defender Body Set is an exact replica of the full scale vehicle, right down to the rivets! No other scale body comes this close to realism.

    The Defender Body Set comes in durable hard plastic molded in a paintable white finish, perfect for custom paint. All the trim parts are separate pieces to get a great look, with minimal fuss.

    Comprised of over 50 parts, the Defender Body Set features a full detailed interior. Folding seats, gear shifter, handbrake and detailed dash. Its all here to bring your build to next level.

    The crisp lines and subtle details are all captured. Chrome plated parts are included as well as colored lenses for all signal lights. All lamps can be illuminated with a minimum of modification.
    Gelande II Shown Painted and with Upgrades (Not Included)


    Barcode 2001484000010


    Aggiungi l'articolo alla lista dei desideri!
     Articolo aggiunto alla tua lista dei desideri! 
Note tecniche e descrizioni dei vari articoli sono pubblicati così come vengono forniti dal costruttore e/o distributore, immagini allegate comprese, e potrebbero contenere delle inesattezze o delle omissioni. Non ci assumiamo quindi alcuna responsabilità a riguardo.

Big Models S.r.l. - via Pier Vittorio Aldini,41 - Roma
Tel. 06 79320402 • Fax. 06 79320402 • P. IVA 04563861006 • Iscr. AEE n° IT09060000006100
La vendita è riservata ai soli commercianti del settore
Mail: info@ingrossomodellismo.it   © Big Models s.r.l. 2005
NOTA: tutti i prodotti da Noi distribuiti recepiscono la DIRETTIVA R.&.T.T.E. 1999/5/CE DECRETO LEGISLATIVO 269/01

  webmaster : Massimo Marra