Orari di apertura 
Lun-Ven 9-13 14-18
Sabato  9-13  14-16

Domenica Chiuso


Seleziona il tipo di ricerca:


ATTENZIONE: Alcune informazioni relative al prodotto sono visibili soltanto agli utenti registrati!

Torna alla pagina precedente TORNA CATALOGO / MODELLI DINAMICI / AUTO A SCOPPIO / .2 PISTA TOURING IN KIT / MUGT2003

Articolo : MUGT2003 Disponibilità :  Scarsa  Scarsa


    MUGEN MTX6 NITRO TOURING  1/10

    MUGEN MTX6 NITRO TOURING  1/10   MUGEN MTX6 NITRO TOURING  1/10   MUGEN MTX6 NITRO TOURING  1/10
    MUGEN MTX6 NITRO TOURING 1/10

    IN KIT CON CAPPELLO MUGEN

    Fornitore

    The MTX-6 has been designed with drastic improvements in respects such as steering, traction, durability and overall maintenance.

    MTX-6 over view:

    - Standard issue on the MTX6 are many diverse parts such as: alum rear lower suspension arm to
    mounts, front/rear differential case, front upper arm & arm bracket, front alum bulkhead changes
    the 2nd gear pinion and spur gear, high strength front body mount and stronger chassis with many
    more new parts that where strengthened too.
    - A new twin brace system connects to both sides of the 2 speed gear box to the radio plate which
    will almost eliminate flex on the chassis. This will create better power from the engine to the
    drive train.
    - The MTX6 has improved rigidity around the engine area, smaller holes under the front/rear
    differentials which will reduce flex of the chassis and make for better front/rear balance of the car.
    - The rear bulkhead has new bracing that connects to the 2 speed gear shaft bulkhead and controls
    the twist of both sides of the chassis and improves the efficiency of the whole drive train.
    - There is a 1mm wider 2nd pinion gear and spur gear for greater durability.
    - The brake disc is mounted to the 2 speed shaft for more consistent and stronger braking power.
    - A specially designed front bulkhead to make removal of differential much easier plus an increase
    in strength.
    - A new servo saver which will allow for more adjustability for different track condition.
    - Graphite front/rear shock towers, a new shock spring will greatly improve stability, steering and
    traction on all surfaces.
    - A new clutch spring designed from exotic materials and heat treated to keep constant stability
    in clutch feel over a long periods of racing under high heat temperatures.

    Other necessary equipment:

    2ch Radio and 2 servos / Receiver / Connecting Cable / Receiver Battery / 12 Class Rear Exhaust Engine / Muffler / Manifold / Manifold Spring / Tire & Wheel / Air Filter / Engine Starter / Body & Body paint tools / Fuel

    Barcode 4944925029837


    Aggiungi l'articolo alla lista dei desideri!
     Articolo aggiunto alla tua lista dei desideri! 
    MUGEN MTX6 NITRO TOURING  1/10
    Technical Data:

    - Length: 380mm
    - Width: Max. 200mm adjustable
    - Wheel Base: 257.5mm~260.5mm adjustable
    - Tread (F/R): 173mm/169mm
    - F. Caster Angle: 6.4°~13.8° adjustable
    - Gear Ratio: 1st. 7.24:1 / 2nd. 4.69:1

    Other necessary equipment:

    2ch Radio and 2 servos / Receiver / Connecting Cable / Receiver Battery / 12 Class Rear Exhaust Engine / Muffler / Manifold / Manifold Spring / Tire & Wheel / Air Filter / Engine Starter / Body & Body paint tools / Fuel


    Aggiungi l'articolo alla lista dei desideri!
     Articolo aggiunto alla tua lista dei desideri! 
    MUGEN MTX6 NITRO TOURING 1/10

    IN KIT CON CAPPELLO MUGEN

    Fornitore

    The MTX-6 has been designed with drastic improvements in respects such as steering, traction, durability and overall maintenance.

    MTX-6 over view:

    - Standard issue on the MTX6 are many diverse parts such as: alum rear lower suspension arm to
    mounts, front/rear differential case, front upper arm & arm bracket, front alum bulkhead changes
    the 2nd gear pinion and spur gear, high strength front body mount and stronger chassis with many
    more new parts that where strengthened too.
    - A new twin brace system connects to both sides of the 2 speed gear box to the radio plate which
    will almost eliminate flex on the chassis. This will create better power from the engine to the
    drive train.
    - The MTX6 has improved rigidity around the engine area, smaller holes under the front/rear
    differentials which will reduce flex of the chassis and make for better front/rear balance of the car.
    - The rear bulkhead has new bracing that connects to the 2 speed gear shaft bulkhead and controls
    the twist of both sides of the chassis and improves the efficiency of the whole drive train.
    - There is a 1mm wider 2nd pinion gear and spur gear for greater durability.
    - The brake disc is mounted to the 2 speed shaft for more consistent and stronger braking power.
    - A specially designed front bulkhead to make removal of differential much easier plus an increase
    in strength.
    - A new servo saver which will allow for more adjustability for different track condition.
    - Graphite front/rear shock towers, a new shock spring will greatly improve stability, steering and
    traction on all surfaces.
    - A new clutch spring designed from exotic materials and heat treated to keep constant stability
    in clutch feel over a long periods of racing under high heat temperatures.

    Other necessary equipment:

    2ch Radio and 2 servos / Receiver / Connecting Cable / Receiver Battery / 12 Class Rear Exhaust Engine / Muffler / Manifold / Manifold Spring / Tire & Wheel / Air Filter / Engine Starter / Body & Body paint tools / Fuel

    Barcode 4944925029837


    Aggiungi l'articolo alla lista dei desideri!
     Articolo aggiunto alla tua lista dei desideri! 
Note tecniche e descrizioni dei vari articoli sono pubblicati così come vengono forniti dal costruttore e/o distributore, immagini allegate comprese, e potrebbero contenere delle inesattezze o delle omissioni. Non ci assumiamo quindi alcuna responsabilità a riguardo.

Big Models S.r.l. - via Pier Vittorio Aldini,41 - Roma
Tel. 06 79320402 • Fax. 06 79320402 • P. IVA 04563861006 • Iscr. AEE n° IT09060000006100
La vendita è riservata ai soli commercianti del settore
Mail: info@ingrossomodellismo.it   © Big Models s.r.l. 2005
NOTA: tutti i prodotti da Noi distribuiti recepiscono la DIRETTIVA R.&.T.T.E. 1999/5/CE DECRETO LEGISLATIVO 269/01

  webmaster : Massimo Marra