Orari di apertura 
Lun-Ven 9-13 14-18
Sabato  9-13  14-16

Domenica Chiuso


Seleziona il tipo di ricerca:


ATTENZIONE: Alcune informazioni relative al prodotto sono visibili soltanto agli utenti registrati!

Torna alla pagina precedente TORNA CATALOGO / ACCESSORI RC / REGOLATORI ELETTRONICI / .5 PER AUTO BRUSHLESS / GPNOV1731

Articolo : GPNOV1731 Disponibilità :  Scarsa  Scarsa


    VARIATORE BRUSHLESS HAVOC 1S

    VARIATORE BRUSHLESS HAVOC 1S   VARIATORE BRUSHLESS HAVOC 1S   VARIATORE BRUSHLESS HAVOC 1S
    VARIATORE BRUSHLESS HAVOC 1S

    PER AUTO 1/12 CON LiPo DA 3,7v

    Fornitore

    Novak introduces the economical, easy-to-use Havoc Sport 1S Brushless/Brush ESC (#1731). Drivers can now ditch the pricey two-cell and above Li-Po packs, and sport the first speed control with specialized internal Novak Smart Boost™ circuitry. This innovative technology allows drivers to power their vehicle’s electronics on a single 1S Li-Po battery pack without installing additional external boosters or receiver packs. The ingenious ESC simplifies installation and operation, cuts down on vehicle maintenance, and, most importantly, ensures that your vehicle’s electronics are powered properly. This ESC is ideal for beginners and local, club-level racers, and will excel in the Oval, World GT and 12-Scale racing segments.

    SMART BOOST AND BEYOND
    In addition to Novak’s embedded Smart Boost™ technology, the Havoc 1S offers a simple interface, making the ESC completely programmable with a vast number of customization opportunities. One parameter, in particular, is Novak’s Throttle Curve that gives drivers the ability to experiment with two throttle responses that range between a quick burst of power to a smoother, more controlled low-end power delivery. In addition, the Havoc’s Brake Frequency adjustment contains seven degrees of adjustability from a smooth and controllable brake to a more abrupt and grabbier feel. Moreover, Novak has also built into the ESC a 1S Li-Po Cut-Off Circuitry feature, which prevents the battery from going below the critical safety voltage level. For further racing opportunities, Novak installed a Reverse Disable feature to turn the Havoc 1S into a forward-only brushless system for club-level racing.

    The Havoc 1S also includes a Novak Glitch Buster Capacitor (#5626) to eliminate noise generated from the servos.

    MOTOR COMPATIBILITY
    The Havoc 1S ESC and SS Pro motors contain Thermal Overload Protection circuitry to protect the system from overheating and damage. In fact, the ESC will only operate with brushless motors that have built-in thermal protection that follow ROAR guidelines, such as Novak’s new Ballistic Brushless Motors (#3603-#3621). This sophisticated feature ensures a fun day at the track without the worry of overheating. For the complete list of compatible motors, click here.



    Barcode 0607209017312


    Aggiungi l'articolo alla lista dei desideri!
     Articolo aggiunto alla tua lista dei desideri! 
    VARIATORE BRUSHLESS HAVOC 1S
    Caratteristiche :

    Input Voltage: 1S Li-Po cell*
    ESC Footprint: 1.18” x 1.54” (30.0 x 39.1 mm)
    Motor Limit: All thermally protected 540-size sensored brushless motors down to 8.5-turn / 27-turn 540-sized brushed motors
    On-Resistance (brushless): 0.0007 ohms @ 25°C trans. temp.
    BEC: 6.0 volts DC / 3.0 amps
    Status LEDs: 4
    Voltage Cut-Off: 3.1V (when Li-Poly Cut-Off Circuitry is enabled)
    Power Wires: 14G Super-Flex Copper-Strand Silicone Wire
    Battery Plug: Tamiya battery connectors



    Aggiungi l'articolo alla lista dei desideri!
     Articolo aggiunto alla tua lista dei desideri! 
    VARIATORE BRUSHLESS HAVOC 1S

    PER AUTO 1/12 CON LiPo DA 3,7v

    Fornitore

    Novak introduces the economical, easy-to-use Havoc Sport 1S Brushless/Brush ESC (#1731). Drivers can now ditch the pricey two-cell and above Li-Po packs, and sport the first speed control with specialized internal Novak Smart Boost™ circuitry. This innovative technology allows drivers to power their vehicle’s electronics on a single 1S Li-Po battery pack without installing additional external boosters or receiver packs. The ingenious ESC simplifies installation and operation, cuts down on vehicle maintenance, and, most importantly, ensures that your vehicle’s electronics are powered properly. This ESC is ideal for beginners and local, club-level racers, and will excel in the Oval, World GT and 12-Scale racing segments.

    SMART BOOST AND BEYOND
    In addition to Novak’s embedded Smart Boost™ technology, the Havoc 1S offers a simple interface, making the ESC completely programmable with a vast number of customization opportunities. One parameter, in particular, is Novak’s Throttle Curve that gives drivers the ability to experiment with two throttle responses that range between a quick burst of power to a smoother, more controlled low-end power delivery. In addition, the Havoc’s Brake Frequency adjustment contains seven degrees of adjustability from a smooth and controllable brake to a more abrupt and grabbier feel. Moreover, Novak has also built into the ESC a 1S Li-Po Cut-Off Circuitry feature, which prevents the battery from going below the critical safety voltage level. For further racing opportunities, Novak installed a Reverse Disable feature to turn the Havoc 1S into a forward-only brushless system for club-level racing.

    The Havoc 1S also includes a Novak Glitch Buster Capacitor (#5626) to eliminate noise generated from the servos.

    MOTOR COMPATIBILITY
    The Havoc 1S ESC and SS Pro motors contain Thermal Overload Protection circuitry to protect the system from overheating and damage. In fact, the ESC will only operate with brushless motors that have built-in thermal protection that follow ROAR guidelines, such as Novak’s new Ballistic Brushless Motors (#3603-#3621). This sophisticated feature ensures a fun day at the track without the worry of overheating. For the complete list of compatible motors, click here.



    Barcode 0607209017312


    Aggiungi l'articolo alla lista dei desideri!
     Articolo aggiunto alla tua lista dei desideri! 
Note tecniche e descrizioni dei vari articoli sono pubblicati così come vengono forniti dal costruttore e/o distributore, immagini allegate comprese, e potrebbero contenere delle inesattezze o delle omissioni. Non ci assumiamo quindi alcuna responsabilità a riguardo.

Big Models S.r.l. - via Pier Vittorio Aldini,41 - Roma
Tel. 06 79320402 • Fax. 06 79320402 • P. IVA 04563861006 • Iscr. AEE n° IT09060000006100
La vendita è riservata ai soli commercianti del settore
Mail: info@ingrossomodellismo.it   © Big Models s.r.l. 2005
NOTA: tutti i prodotti da Noi distribuiti recepiscono la DIRETTIVA R.&.T.T.E. 1999/5/CE DECRETO LEGISLATIVO 269/01

  webmaster : Massimo Marra