Orari di apertura 
Lun-Ven 9-13 14-18
Sabato  9-13  14-16

Domenica Chiuso


Seleziona il tipo di ricerca:


ATTENZIONE: Alcune informazioni relative al prodotto sono visibili soltanto agli utenti registrati!

Torna alla pagina precedente TORNA CATALOGO / ACCESSORI RC / REGOLATORI ELETTRONICI / 10 CENTRALINE E RIDUTTORI X RX / GPED-UBEC-10A

Articolo : GPED-UBEC-10A Disponibilità :  Non Disponibile  NonDisponibile


    RIDUTTORE DI TENSIONE  6S 10Ah

    RIDUTTORE DI TENSIONE  6S 10Ah   RIDUTTORE DI TENSIONE  6S 10Ah   RIDUTTORE DI TENSIONE  6S 10Ah
    RIDUTTORE DI TENSIONE 6S 10Ah

    HW-UBEC-10A-HV 30603000

    Fornitore

    1. Introduction
    The UBEC is an external switching mode DC-DC regulator it draws the DC voltage from 2-6S Lipo battery, drops it to a voltage level that is suitable for receivers and other electronic devices, and keep providing the stable current output up to 10Amp. As the UBEC has such a powerful output capability, so it is particularly applicable for large helicopters and fixed-wing aircrafts.


    2. Specifications
    2.1 Input Voltage: 6V-25.2V (2-6S LiPo)
    2.2 Output Voltage: 5.0V/6.0V/7.4V/8.4V
    2.3 Output Amperage: Continuous Current: 10A, Peak Current: 20A
    2.4 Dimension: 43.1 x 32.3 x 12.5mm (L x W x H)
    2.5 Weight: 36g

    3. Features
    3.1 It adopted the advanced DC-DC regulator chip with conversion efficiency exceeds 90%
    3.2 4 options for the output voltage, applicable for all kinds of receivers/gyros/servos, etc.
    3.3 It owns BEC shoot-through protection, which prevent the input voltage from directly flowing to the output end and causing damages to receivers, servos and other electronic devices
    3.4 It featured other protections like over-current protection, short-circuit protection (at the output end) and thermal protection make the use more safe and reliable
    3.5 Two cables are connected in parallel at the output end of the UBEC, allow larger current to flow into the receiver.
    3.6 It has one status LED, which lights up when the output voltage is within the normal range
    3.7 The external switch can turn on/off the UBEC easily
    3.8 Exquisite aluminum case is helpful for heat dissipation & EMI (Electromagnetic Interference) reduction.

    The output voltage is programmable by dip switches.
    4 Options: 5.0V/6.0V/7.4V/8.4V

    Barcode 2010229101011


    Aggiungi l'articolo alla lista dei desideri!
     Articolo aggiunto alla tua lista dei desideri! 
    RIDUTTORE DI TENSIONE  6S 10Ah
    2. Specifications
    2.1 Input Voltage: 6V-25.2V (2-6S LiPo)
    2.2 Output Voltage: 5.0V/6.0V/7.4V/8.4V
    2.3 Output Amperage: Continuous Current: 10A, Peak Current: 20A
    2.4 Dimension: 43.1 x 32.3 x 12.5mm (L x W x H)
    2.5 Weight: 36g



    Aggiungi l'articolo alla lista dei desideri!
     Articolo aggiunto alla tua lista dei desideri! 
    RIDUTTORE DI TENSIONE 6S 10Ah

    HW-UBEC-10A-HV 30603000

    Fornitore

    1. Introduction
    The UBEC is an external switching mode DC-DC regulator it draws the DC voltage from 2-6S Lipo battery, drops it to a voltage level that is suitable for receivers and other electronic devices, and keep providing the stable current output up to 10Amp. As the UBEC has such a powerful output capability, so it is particularly applicable for large helicopters and fixed-wing aircrafts.


    2. Specifications
    2.1 Input Voltage: 6V-25.2V (2-6S LiPo)
    2.2 Output Voltage: 5.0V/6.0V/7.4V/8.4V
    2.3 Output Amperage: Continuous Current: 10A, Peak Current: 20A
    2.4 Dimension: 43.1 x 32.3 x 12.5mm (L x W x H)
    2.5 Weight: 36g

    3. Features
    3.1 It adopted the advanced DC-DC regulator chip with conversion efficiency exceeds 90%
    3.2 4 options for the output voltage, applicable for all kinds of receivers/gyros/servos, etc.
    3.3 It owns BEC shoot-through protection, which prevent the input voltage from directly flowing to the output end and causing damages to receivers, servos and other electronic devices
    3.4 It featured other protections like over-current protection, short-circuit protection (at the output end) and thermal protection make the use more safe and reliable
    3.5 Two cables are connected in parallel at the output end of the UBEC, allow larger current to flow into the receiver.
    3.6 It has one status LED, which lights up when the output voltage is within the normal range
    3.7 The external switch can turn on/off the UBEC easily
    3.8 Exquisite aluminum case is helpful for heat dissipation & EMI (Electromagnetic Interference) reduction.

    The output voltage is programmable by dip switches.
    4 Options: 5.0V/6.0V/7.4V/8.4V

    Barcode 2010229101011


    Aggiungi l'articolo alla lista dei desideri!
     Articolo aggiunto alla tua lista dei desideri! 
Note tecniche e descrizioni dei vari articoli sono pubblicati così come vengono forniti dal costruttore e/o distributore, immagini allegate comprese, e potrebbero contenere delle inesattezze o delle omissioni. Non ci assumiamo quindi alcuna responsabilità a riguardo.

Big Models S.r.l. - via Pier Vittorio Aldini,41 - Roma
Tel. 06 79320402 • Fax. 06 79320402 • P. IVA 04563861006 • Iscr. AEE n° IT09060000006100
La vendita è riservata ai soli commercianti del settore
Mail: info@ingrossomodellismo.it   © Big Models s.r.l. 2005
NOTA: tutti i prodotti da Noi distribuiti recepiscono la DIRETTIVA R.&.T.T.E. 1999/5/CE DECRETO LEGISLATIVO 269/01

  webmaster : Massimo Marra