Orari di apertura 
Lun-Ven 9-13 14-18
Sabato  9-13  14-16

Domenica Chiuso


Seleziona il tipo di ricerca:


ATTENZIONE: Alcune informazioni relative al prodotto sono visibili soltanto agli utenti registrati!

Torna alla pagina precedente TORNA CATALOGO / ATTREZZATURA MODELLISTICA / COLLANTI / .2 EPOXY E RESINE BICOMPONENTI / CNDMPO-S25-BK

Articolo : CNDMPO-S25-BK Disponibilità :  Ottima  Ottima


    EPOXY 5 MINUTI            25gr

    EPOXY 5 MINUTI            25gr   EPOXY 5 MINUTI            25gr   EPOXY 5 MINUTI            25gr
    EPOXY 5 MINUTI 25gr

    Fornitore

    MD POX is a highly reactive two-component epoxy adhesive for bonding metal, ceramic, glass, stone, wood, hard plastics. It is suitable for many on-the-spot repairs with high quality and little effort. Easy handling thanks to the automatically regulated two-injection system. MD POX remains stiff-flexible and can therefore guarantee permanent rigidity in case of impacts or vibration. Temperature resistance: -40 °C to +80 °C. Application temperature: +10 °C to +30 °C. Final hardening: 24 hours. Pot life: approx. 5 minutes. Do not work at outdoor temperatures below 5 °C. Instructions for use: The surfaces to be glued are to be thoroughly cleaned with a good degreaser. Excellent results are obtained if the surface is first mechanically roughened. Remove cap by twisting, place mixing nozzle on and tighten. Press material out and dispose of the first 2 g as it has yet not been mixed 1:1. The setting time is shortened with high temperatures. Place work pieces together and fix. Remove and dispose of mixing nozzle. Replace cap. Store opened cartridge in a cool place and use up as quickly as possible.

    Barcode 4016673006979


    Aggiungi l'articolo alla lista dei desideri!
     Articolo aggiunto alla tua lista dei desideri! 
    EPOXY 5 MINUTI            25gr
    Physical properties (in liquid state)
    Color (mixed): transparent
    Viscosity (mixed) @ +25 °C: 15.000-30.000 mPa-s
    Mixing ratio: 1:1
    Processing time: ca. 5 min
    Curing time: 48 h
    Temperature resistance: -40 °C bis +80 °C
    ASTM D1002 after 72 h @ 25 °C
    Steel: 18-22 N/mm²
    Stainless steel: 10-12 N/mm²
    Aluminium: 6-8 N/mm²
    Polycarbonate: 5-8 N/mm²
    PVC: 5-8 N/mm²


    Aggiungi l'articolo alla lista dei desideri!
     Articolo aggiunto alla tua lista dei desideri! 
    EPOXY 5 MINUTI 25gr

    Fornitore

    MD POX is a highly reactive two-component epoxy adhesive for bonding metal, ceramic, glass, stone, wood, hard plastics. It is suitable for many on-the-spot repairs with high quality and little effort. Easy handling thanks to the automatically regulated two-injection system. MD POX remains stiff-flexible and can therefore guarantee permanent rigidity in case of impacts or vibration. Temperature resistance: -40 °C to +80 °C. Application temperature: +10 °C to +30 °C. Final hardening: 24 hours. Pot life: approx. 5 minutes. Do not work at outdoor temperatures below 5 °C. Instructions for use: The surfaces to be glued are to be thoroughly cleaned with a good degreaser. Excellent results are obtained if the surface is first mechanically roughened. Remove cap by twisting, place mixing nozzle on and tighten. Press material out and dispose of the first 2 g as it has yet not been mixed 1:1. The setting time is shortened with high temperatures. Place work pieces together and fix. Remove and dispose of mixing nozzle. Replace cap. Store opened cartridge in a cool place and use up as quickly as possible.

    Barcode 4016673006979


    Aggiungi l'articolo alla lista dei desideri!
     Articolo aggiunto alla tua lista dei desideri! 
Note tecniche e descrizioni dei vari articoli sono pubblicati così come vengono forniti dal costruttore e/o distributore, immagini allegate comprese, e potrebbero contenere delle inesattezze o delle omissioni. Non ci assumiamo quindi alcuna responsabilità a riguardo.

Big Models S.r.l. - via Pier Vittorio Aldini,41 - Roma
Tel. 06 79320402 • Fax. 06 79320402 • P. IVA 04563861006 • Iscr. AEE n° IT09060000006100
La vendita è riservata ai soli commercianti del settore
Mail: info@ingrossomodellismo.it   © Big Models s.r.l. 2005
NOTA: tutti i prodotti da Noi distribuiti recepiscono la DIRETTIVA R.&.T.T.E. 1999/5/CE DECRETO LEGISLATIVO 269/01

  webmaster : Massimo Marra